304 2b surface stainless steel sheet introduction
Grade 304 is the standard “18/8” stainless. It has excellent forming and welding characteristics.
Grade 304L, the low carbon version of 304, does not require post-weld annealing and so is extensively used in heavy gauge components. The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures.
304 2b surface stainless steel sheet certification
Upon request of the purchaser in the contract or order, the producer’s certification that the material was manufactured and tested in accordance with this specification, together with a certified report of the test results shall be furnished at the time of the shipment.
Excellent in a wide range of atmospheric environments and many corrosive media. Subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above about 50°C. Considered resistant to potable water with up to about 200mg/L chlorides at ambient temperatures, reducing to about 150mg/L at 60°C. Consult Atlas Technical Assistance for specific environmental recommendations.
Are you looking for a 304 2b surface stainless steel sheet supplier with good reputation? Don’t hesitate any more, Jianye Stainless Steel is your best choice. We are an ISO 9001:2008 certified manufacturer with more than ten years experience in stainless steel export.